Facile room-temperature synthesis of a spherical mesoporous covalent organic framework for capillary electrochromatography.

Herein, a spherical covalent organic framework COF TAPB-DMTP was facilely synthesized from 2,5-dimethoxyterephthalaldehyde (DMTP) and 1,3,5-tri-(4-aminophenyl)benzene (TAPB) as monomers. COF TAPB-DMTP with regular mesoporous and excellent mass transfer ability was first introduced into the capillary and immobilized on the inner wall of the capillary through a simple in situ growth method. Through various characterization results, COF TAPB-DMTP was successfully prepared and modified onto the capillary inner wall. The separation performance and potential of COF TAPB-DMTP modified capillary column was explored. The new developed COF modified column achieved a highly efficiency and selective separation between analytes with different properties, including halogeno benzenes, alkylbenzenes, phenols and sulfonamides. Satisfactory stability and reproducibility were observed on COF TAPB-DMTP modified columns. The intraday, interday and three batch columns relative standard deviations were all less than 1.85 % for the retention time. The separation performance of prepared column has no significant change after 90 continuous runs. Additionally, the COF TAPB-DMTP modified capillary column was successfully used for separation and detection of triazole antifungal drugs in human plasma, and the recoveries of three antifungal drugs (fluconazole, isavuconazole and posaconazole) in spiked samples were in the range of 98.6-100.8 %, 92.4-102.1 % and 99.9-107.5 %, respectively. This self-made column showed excellent application potential in chromatography separation science.

Ionic liquids in capillary electrophoresis analysis of proteins and carbohydrates.

Ionic liquids (ILs), as non-molecular type solvents, possess excellent physical-chemical properties, which make them useful in important separation applications in gas chromatography, liquid chromatography, and capillary electrophoresis. Among a plethora of potential uses of ionic liquids in separation science, capillary electrophoresis can utilize its resolution-enhancing effect in the analysis of proteins and carbohydrates, via the formation of intermolecular interactions, e.g., hydrophobic, hydrogen bonding, or electrostatic. ILs and polymeric ionic liquids (PIL) also represent an excellent choice as background electrolyte (BGE) additives for capillary coatings in CE, which is especially important in protein analysis. Another interesting utilization of ILs is the fabrication of monoliths for capillary electrochromatography in which instance the mechanism of retention is based on ion exclusion interactions. Carbohydrates can also be readily analyzed by CE with the help of ionic liquids without the need for an extra derivatization step. One of the future perspectives on the use of ILs is their utilization in the recently emerging biopharmaceutical industry exploiting the increased resolution of proteins and carbohydrates, two of the important components of glycoprotein therapeutics. In this paper, we address the so-far not-reviewed ionic liquid-mediated analysis of proteins and carbohydrates by capillary electrophoresis-based techniques also addressing their impact on the separation mechanism.

Multilayer coatings based on gold nanoparticles and polymers with bovine serum albumin as a functional layer for the chiral separation in capillary electrochromatography.

In this study, we developed physically adsorbed multi-layer coatings using poly-l-lysine or poly(diallyldimethylammonium chloride) and gold nanoparticles, which were functionalized with bovine serum albumin for the chiral separation in electrochromatography. The approach involves sequentially depositing positively charged polymers and negatively charged citrate-stabilized gold nanoparticles. By repeating this modification cycle, we created two- and four-layer coatings, which were sequentially functionalized with albumin forming three- and five-layer coatings that were finally applied for the separation of enantiomers of dl-tryptophan. The formed coatings exhibit stability across a pH range of 2-10 and feature a dense, uniform surface, as confirmed by scanning electron microscope images. The number of layers impacted nanoparticle deposition density, with five-layer coatings being denser than three-layer ones. Five-layer coatings enable baseline separation of dl-tryptophan enantiomers, whereas three-layer coatings require the presence of albumin in the background electrolyte for separation. Therefore, increasing the number of layers and gold nanoparticles density enhances albumin active center concentration on capillary walls, improving the separation of dl-tryptophan enantiomers. The five-layer coatings can be easily fabricated and possess good repeatability of analytes migration time.

Organic-silica hybrid monolithic sorbents for sample preparation techniques: A review on advances in synthesis, characterization, and applications.

Organic-silica hybrid monolithic materials have attracted considerable attention as potential stationary phases in separation science. These materials combine the advantages of organic polymer and silica-based monoliths, including easy preparation, lower back pressure, high permeability, excellent mechanical strength, thermal stability, and tunable surface chemistry with high surface area and selectivity. The outstanding chromatographic efficiency as stationary phase of hybrid monolithic capillary columns for capillary liquid chromatography and capillary electrochromatography has been reported in many papers. Organic-silica hybrid monolithic materials have also been extensively used in the field of sample preparation. Owing to their surface functionalities, these porous sorbents offer unique selectivity for pre-concentration of different analytes in the most complex matrixes by fast dynamic transport. These sorbents not only improve the analytical method sensitivity, but also introduce novelties in terms of extraction devices and instrument coupling strategies. The current review covers the period spanning from 2017 to 2023 and describes the properties of organic-inorganic hybrid monolithic materials, the present status of this technology and summarizes recent developments in their use as innovative sorbents for microextraction sample preparation techniques (solid phase microextraction with pipette tip, offline in-tube SPME, in-tube SPME online with LC, and in-tube SPME directly coupled with mass spectrometry). Aspects such as the synthesis methods (sol-gel process, one-pot approach, and polyhedral oligomeric silsesquioxanes-based procedure), characterization techniques, and strategies to improve extraction efficiency in various applications in different areas (environmental, food, bioanalysis, and proteomics) are also discussed.

Open tubular capillary electrochromatography with dual-responsive polymer as coating for separation of chromones.

Fabricating polymeric coatings that are responsive to multiple/dual stimuli is crucial and remains a major challenge in the development of highly efficient open tubular capillary electrochromatography (OT-CEC). In this study, a pH and temperature-responsive block copolymer, poly(styrene-maleic anhydride 2-dimethylamino ethyl methacrylate), P(St-MAn-DMAEMA), was designed and synthesized. Using P(St-MAn-DMAEMA) as the coating, an OT-CEC protocol was constructed for the analysis of chromones. The morphology and hydrophobicity-hydrophilicity of the polymeric coating could change via varying the environmental conditions, affecting the separation efficiency of OT-CEC. Interestingly, the best performance of OT-CEC was achieved at pH 9.7 and 45 °C via tuning the interactions between the coating and the analytes. Additionally, the proposed OT-CEC method exhibited a good linear range for the detection of the three test chromones from 10.0 to 100.0 µM, with all correlation coefficients (R2) >0.997. The coatings also had good stability and reusability. This work provides an approach for the preparation of new multiple-stimuli-responsive polymeric coatings for the establishment of OT-CEC systems.

Emerging Developments in Separation Techniques and Analysis of Chiral Pharmaceuticals.

Chiral separation, the process of isolating enantiomers from a racemic mixture, holds paramount importance in diverse scientific disciplines. Using chiral separation methods like chromatography and electrophoresis, enantiomers can be isolated and characterized. This study emphasizes the significance of chiral separation in drug development, quality control, environmental analysis, and chemical synthesis, facilitating improved therapeutic outcomes, regulatory compliance, and enhanced industrial processes. Capillary electrophoresis (CE) has emerged as a powerful technique for the analysis of chiral drugs. This review also highlights the significance of CE in chiral drug analysis, emphasizing its high separation efficiency, rapid analysis times, and compatibility with other detection techniques. High-performance liquid chromatography (HPLC) has become a vital technique for chiral drugs analysis. Through the utilization of a chiral stationary phase, HPLC separates enantiomers based on their differential interactions, allowing for the quantification of individual enantiomeric concentrations. This study also emphasizes the significance of HPLC in chiral drug analysis, highlighting its excellent resolution, sensitivity, and applicability. The resolution and enantiomeric analysis of nonsteroidal anti-inflammatory drugs (NSAIDs) hold great importance due to their chiral nature and potential variations in pharmacological effects. Several studies have emphasized the significance of resolving and analyzing the enantiomers of NSAIDs. Enantiomeric analysis provides critical insights into the pharmacokinetics, pharmacodynamics, and potential interactions of NSAIDs, aiding in drug design, optimization, and personalized medicine for improved therapeutic outcomes and patient safety. Microfluidics systems have revolutionized chiral separation, offering miniaturization, precise fluid control, and high throughput. Integration of microscale channels and techniques provides a promising platform for on-chip chiral analysis in pharmaceuticals and analytical chemistry. Their applications in techniques such as high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) offer improved resolution and faster analysis times, making them valuable tools for enantiomeric analysis in pharmaceutical, environmental, and biomedical research.

Recent developments in electromigration techniques related to pharmaceutical and biomedical analysis - A review.

The analysis of pharmaceutical compounds is an important research topic as the use of different drugs affects people's daily life for the treatment of diseases. In addition to the widespread use of the internet, counterfeit drugs have appeared in the market. The development of modern analytical techniques, reliable, precise, sensitive, and rapid methods, has provided powerful means of analysis used in various fields such as drug production, quality control, determination of impurities and/or metabolites, biochemistry, pharmacokinetics, etc. Analytical techniques so far used in the pharmaceutical analysis include high-performance liquid chromatography (HPLC), gas chromatography (GC), super/sub-critical fluid chromatography (SFC), and capillary electromigration techniques such as capillary electrophoresis (CE) and rather rarely capillary electrochromatography (CEC). CE has some advantages over other techniques, e.g., very high efficiency, reduced costs (use of minute volumes of solvents and samples), the possibility to use different separation mechanisms, etc. In this review paper, the main features and limitations of the capillary electromigration techniques (especially CE) are discussed. Some selected applications of CE to the analysis of pharmaceutical compounds published in the period 2021-2023 (May) are reported.

Construction of chiral capillary electrochromatography microsystems based on Aspergillus sp. CM96.

Novel chiral capillary electrochromatography (CEC) microsystems were constructed based on Aspergillus sp. CM96. As a newly discovered intrinsic characteristic of the cell, cell chirality occupies an essential position in life evolution. Aspergillus sp. CM96 spore (CM96s) was chosen as a proof of concept to develop chiral capillary columns. Interestingly, various types of amino acid (AA) enantiomers were baseline separated under the optimized conditions. Furthermore, the time-dependent chiral interactions between AAs and CM96s were explored in a wider space. Pectinases generated from Aspergillus sp. CM96 fermentation were immobilized onto graphene oxide-functionalized capillary silica monoliths for separating AA enantiomers. Molecular docking simulations were performed to explore chiral separation mechanisms of pectinase for AA enantiomers. These results indicated that Aspergillus sp. CM96-based CEC microsystems have a significant advantage for chiral separation.

In-situ immobilization of covalent organic frameworks as stationary phase for capillary electrochromatography.

A new kind of covalent organic framework (COF) was first utilized as an stationary phase for open-tubular electrochromatography (OT-CEC) by in situ synthesis immobilized method at room temperature. On the basis of our previous work, 4,4',4″-(1,3,5-Triazine-2,4,6-triyl)trianiline (TZ) and 2,5-bis(2-propyn-1-yloxy)-1,4-benzenedicarboxaldehyde (BPTA) were employed as building blocks for the synthesis of COF TZ-BPTA. The coated capillary and COF TZ-BPTA were characterized by scanning electron microscopy (SEM). Then, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) were also applied to characterize COF TZ-BPTA and the modified column. In SEM, it can be seen that COF TZ-BPTA was the spherical shape and the modified capillary was covered with globular particles equably. The COF TZ-BPTA coated column exhibited good separation resolution and efficiency towards two antiepileptic drugs and other kinds of small organic molecules involving alkylbenzene, sulfonamides, polycyclic aromatic hydrocarbon (PAH), parabens, amino acids and herbicides. The maximum column efficiency was over 2.8 × 105 plates·m-1. In addition, the precisions (RSDs) of the retention times for the alkylbenzenes of intra-day runs (n = 3), inter-day runs (n = 3) and column-to-column runs (n = 3) were all less than 1.70% and separation performance was without obvious change within 100 times run. In addition, the real sample was tested on COF TZ-BPTA coated column. Hence, COF TZ-BPTA showed great potential in the separation domain.

Three-dimensional fluorinated covalent organic frameworks coated capillary for the separation of fluoroquinolones by capillary electrochromatography.

In this work, a three-dimensional fluorinated covalent organic frameworks (3D FCOFs) JUC-515 was synthesized from tetra(4-aminophenyl)methane (TAM) and 2,3,5,6-tetrafluoroterephthalol (TFA) by an ionic liquid method. JUC-515 was introduced into the capillary column and bonded to the inner wall of the capillary column by chemical bonding. Through a variety of characterization results, JUC-515 was successfully synthesized and introduced into the capillary column. The effects of buffer solution concentration, organic additive content and pH of the buffer solution on the separation of fluoroquinolones (FQs) were investigated in detail. The JUC-515-coated capillary column showed good resolution (>1.5) and reproducibility. The relative standard deviations (RSDs) of the retention time for intraday, interday, column-to-column and interbatch precision were less than 0.88%, 2.45%, 2.74% and 3.32%, respectively. The RSDs of the peak area for intraday, interday, column-to-column and interbatch precision were less than 3.79%, 4.31%, 3.33% and 5.62%, respectively. The JUC-515-coated capillary column could be used no less than 150 times. The results showed that the JUC-515-coated capillary column had good separation performance. In addition, by separating fluorinated ß-phenylalanine analogs, ß-phenylalanine and trifluoromethyl ß-phenylalanine analogs, the separation mechanism based on fluorine interactions was discussed. In conclusion, JUC-515 had good potential as a stationary phase for capillary electrochromatography.

Enantiomeric analysis of drugs in water samples by using liquid-liquid microextraction and nano-liquid chromatography.

The nano-LC technique is increasingly used for both fast studies on enantiomeric analysis and test beds of novel stationary phases due to the small volumes involved and the short conditioning and analysis times. In this study, the enantioseparation of 10 drugs from different families was carried out by nano-LC, utilizing silica with immobilized amylose tris(3-chloro-5-methylphenylcarbamate) column. The effect on chiral separation caused by the addition of different salts to the mobile phase was evaluated. To simultaneously separate as many enantiomers as possible, the effect of buffer concentration in the mobile phase was studied, and, to increase the sensitivity, a liquid-liquid microextraction based on the use of isoamyl acetate as sustainable extraction solvent was applied to pre-concentrate four chiral drugs from tap and environmental waters, achieving satisfactory recoveries (>70%).

One-step synthesis of chiral molecularly imprinted polymer TiO2 nanoparticles for enantioseparation of phenylalanine in coated capillary electrochromatography.

A novel chiral molecularly imprinted polymer TiO2 nanoparticle was synthesized in one step for the enantioseparation of phenylalanine in coated capillary electrochromatography. To the author's knowledge, the chiral molecularly imprinted nanomaterials have still not been reported, to date. Chiral molecularly imprinted TiO2 nanomaterials (L-PHE@MIP(APTES-TEOS)@TiO2) were used as a chiral stationary phase to separate the phenylalanine enantiomers in coated capillary electrochromatography (CEC). The imprinted coating was prepared from L-phenylalanine (L-PHE) as the template, TiO2 nanoparticles (NPs) as the support substrate, 3-aminopropyltriethoxysilane (APTES) as the functional monomer, and tetraethyl silicate (TEOS) as the cross-linker. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used for the characterization of the L-PHE@MIP(APTES-TEOS)@TiO2@capillary. Fourier transform infrared spectra (FT-IR), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA) were employed for the characterization of the L-PHE@MIP(APTES-TEOS)@TiO2. The effects of the applied voltage, pH value, buffer concentration, and acetonitrile content were investigated  experimentally to determine the optimum conditions for CEC. The best resolution for  phenylalanine enantiomers by CEC reached a value of 3.48. In addition, the specific recognition effect of L-PHE@MIP(APTES-TEOS)@TiO2 on PHE enantiomers was studied by selective experiment. Finally, adsorption kinetic research, adsorption equilibrium isotherm study, and adsorption thermodynamic experiment were carried out to investigate the separation mechanism of PHE enantiomers with the L-PHE@MIP (APTES-TEOS)@TiO2@capillary, and the results were consistent with those of CEC experiments.

A chiral metal-organic framework synthesized by the mixture of chiral and non-chiral organic ligands for enantioseparation of drugs by open-tubular capillary electrochromatography.

A chiral metal-organic framework L-Histidine-Zeolitic imidazolate framework-67 (L-His-ZIF-67) was synthesized by the mixture of chiral organic ligand L-histidine and non-chiral organic ligand 2-methylimidazole directly, and to the author's knowledge, the chiral L-His-ZIF-67 coated capillary column we prepared has still not been reported to date in the field of capillary electrophoresis. This chiral metal-organic frameworks material was used as the chiral stationary phase for enantioseparation of drugs by open-tubular capillary electrochromatography. The separation conditions such as pH value, buffer concentration and proportion of organic modifier were optimized. Under optimal conditions, the established enantioseparation system achieved good separation effect, and the resolution of five chiral drugs: esmolol (7.93), nefopam (3.03), salbutamol (2.42), scopolamine (1.08) and sotalol (0.81). In addition, the chiral recognition mechanism of L-His-ZIF-67 was elucidated by a series of mechanism experiments, and the specific interaction force was preliminarily speculated.

[Annual review of capillary electrophoresis technology in 2022].

This article provides a detailed review of capillary electrophoresis (CE) technology in 2022, summarizing a total of 881 CE technology-related articles searched from ISI Web of Science using the keywords "capillary electrophoresis mass spectrometry" or "capillary isoelectric focusing" or "micellar electrokinetic chromatography" or "capillary electrophoresis" (excluding "capillary electrochromatography""microchip" "microfluidic" "capillary monolithic column"). The review focuses on 16 articles published in Lancet Global Health, ACS Central Science, Microbiome, Trends in Food Science & Technology, TrAC-Trends in Analytical Chemistry, Journal of Pharmaceutical Analysis, Journal of Cachexia, Sarcopenia and Muscle, Food Hydrocolloids, Science of the Total Environment, and Carbohydrate Polymers with impact factors (IFs) greater than 10.0, and 46 articles published in Analytical Chemistry, Analytica Chimica Acta, Talanta, and Food Chemistry with IFs between 5.0 and 10.0. A comprehensive overview of representative CE works published in Journal of Chromatography A, Electrophoresis, and important Chinese core journals (Peking University) with IFs<5.0 is also provided. Based on IFs, this review introduces representative works on CE to facilitate readers' understanding of important research advances in CE technology over the last year.

Preparation of pH-responsive block copolymers for separation of cephalosporin antibiotics by open-tubular capillary electrochromatography.

Stimuli-responsive block copolymers have exhibited their feasibility for drug delivery and analysis of biomolecules. However, study of the electrophoretic behavior of antibiotics by open tubular capillary electrochromatography (OT-CEC) based on smart block copolymers coatings is still a substantial challenge. Herein, we reported an OT-CEC protocol for analysis of cephalosporin antibiotics with pH-responsive block copolymers as coatings. By using the reversible addition-fragmentation chain-transfers radical polymerisation technique, the smart poly(styrene-maleic anhydride-acrylic acid) (P(St-MAn-AA)) was synthesized and subsequently chemical bonded onto the inner walls of amino-grafted capillaries. The pH induced changes in the stretch/curl states of P(St-MAn-AA) chains were used to generate an adjustable hydrophobic/hydrophilic interaction and hydrogen bonds between the polymer coatings and the analytes. The OT-CEC performance was evaluated by varying the monomer ratios, polymer coating amounts and layers, buffer concentrations and pH values. Baseline separation of the three-test antibiotics was achieved at pH 8.0. The proposed OT-CEC technique was further applied to the determination of rat serum antibiotics in the metabolic processes. The present work demonstrates an enhancement in antibiotics separation efficiency, and shows a great potential for the preparation of stimuli-responsive block copolymers coatings and in OT-CEC analysis of real samples in living bio-systems.

Preparation of open tubular capillary column covalently coated with polystyrene sulfonate with 4,4'-Azobis(4-cyanopentanoyl chloride) as polymerization initiator for electrochromatographic separation of alkaloids, sulfonamides, and peptides.

An open tubular capillary electrochromatography column covalently bonded with polystyrene sulfonate was prepared via in situ polymerization using functionalized Azo-initiator 4,4'-Azobis(4-cyanopentanoyl chloride). Scanning electron, fluorescence, and atomic force microscopy techniques showed the formation of a relatively rough layer of polymer. In addition, -CN and C = O stretching vibrations from infrared spectroscopy proved the successful immobilization of the azo-initiator through covalent bonding and X-ray photoelectron spectroscopy confirmed the elemental composition of the formed polymer layer. The prepared column was found to be appropriate for small and medium-sized molecules separation. Compared to bare fused silica capillary column higher selectivity and resolution were obtained for the separation of alkaloids, sulfonamides, and peptides as a result of the electrostatic and pi-pi stacking interactions between the small organic molecules and the coated column without compromising the electroosmotic flow mobility. Separation efficiency was also increased compared to the bare capillary for the separation of alkaloids (about 1.5 times). Moreover, intraday, inter-day, intra-batch, and inter-batch relative standard deviation values of retention time and peak area of peptides were within 2% and 10%, respectively, indicating good repeatability of the column preparation procedure. The developed method for the covalent bonding of polymers through a functionalized azo-initiator could represent a promising stable method for the preparation of an open tubular column.

Poly(carboxyethyl acrylate-co-ethylene glycol dimethacrylate) precursor monolith with bonded Tris ligands for use in hydrophilic interaction capillary electrochromatography.

The facile preparation of a monolithic capillary column with surface bound polar ligands for use in hydrophilic interaction capillary electrochromatography is described. It involved the conversion of poly(carboxyethyl acrylate[CEA]-co-ethylene glycol dimethacrylate[EDMA]) precursor monolith (the so-called carboxy monolith) into a Tris bonded monolith by a post-polymerization functionalization process in the presence of a water soluble carbodiimide, namely N-(3-dimethylaminopropyl)-N´-ethylcarbodiimidehydrochloride. The carbodiimide assisted conversion, allowed the covalent attachment of the carboxyl group of the precursor monolith to the amino group of the Tris ligand via a stable amide linkage. This resulted in the formation of Tris poly(CEA-co-EDMA) monolith, which exhibited the typical retention behavior of hydrophilic interaction stationary phase when analyzing polar and slightly polar neutral or charged compounds. In fact, neutral polar species such as dimethylformamide, formamide and thiourea were retained in the order of increased polarity with acetonitrile rich mobile phase. Also, neutral p-nitrophenyl maltooligosaccharides (PNP-maltooligosaccharides) served as a polar homologous series for gauging the hydrophilicity of the Tris poly(CEA-co-EDMA) monolith, thus forming a versatile testing homologous series for other hydrophilic columns. Other polar anionic species (e.g., hydroxy benzoic acids and nucleotides) and weakly polar anionic compounds (e.g., dansyl amino acids and phenoxy acid herbicides) as well as polar weak bases namely nucleobases and nucleosides were used to probe the hydrophilic characters of the Tris poly(CEA-co-EDMA) monolith. The various polar and weakly polar compounds just mentioned revealed the wide potentiality of the hydrophilic interaction column under investigation.

In situ growth of imine-based covalent organic framework as stationary phase for high-efficiency electrochromatographic separation.

Design of the smart stationary phases, which can improve the separation efficiency is an essential work in the capillary electrochromatography (CEC). Owing to good excellent properties, covalent organic frameworks (COFs) have showed promising potential in the area of separation science. Here, a micro- and mesoporous COF TAPB-BTCA with adequate available interaction sites and outstanding mass transfer performance was first exploited as a stationary phase for high-efficiency in capillary electrochromatography. Through in situ growth approach, the COF TAPB-BTCA coated capillary column was facilely prepared at room temperature. The separation ability of the COF TAPB-BTCA coated capillary column was studied. The fabricated column showed high efficiency for the separation of six types of small molecular compounds, including alkylbenzenes, chlorobenzenes, phenols, parabens, vanillin and related phenolic compounds, and non-steroidal anti-inflammatory drugs (NSAIDs). The maximum theoretical plates reached up to 293,363 N/m for phloroglucinol, showing significantly improved column efficiency in comparison to previous reported COFs-based columns. In addition, the mass loadability for methylbenzene was achieved to 1.44 mg/mL. Also, excellent reproducibility and stability were obtained on the COF TAPB-BTCA coated columns. The relative standard deviations of intra-day (n = 3), inter-day (n = 3) and three batch tubes were all less than 2%, and no obvious change was presented in separation performance after the column was used 120 runs. This COF TAPB-BTCA-based stationary phase would be a promising candidate for high-efficiency chromatographic separation.

Lipase-based MIL-100(Fe) biocomposites as chiral stationary phase for high-efficiency capillary electrochromatographic enantioseparation.

A novel chiral porous column was fabricated by lipase immobilized MIL-100(Fe) biocomposites as chiral stationary phase through covalent coupling and applied to capillary electrochromatographic enantioseparation. MOF-based lipase biocomposites not only enhance stereoselective activities but also improve the stability and applicability of the enzyme. The functionalized porous columns were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and powder X-ray diffraction. The performance of the porous column was evaluated by enantioseparating amino acid enantiomers, affording high resolution over 2.0. Besides, the enantio-resolutions of phenylephrine, phenylsuccinic acid, chloroquine, and zopiclone were also greater than 2.0. The relative standard deviations of run-to-run, intra-, and inter-day repeatability were within 4.0% in terms of resolution and retention time, exhibiting excellent stability of the column. Conceivably, the results show that MOF-based lipase composites as chiral stationary phase offer a highly efficient means for enantioseparation in capillary electrochromatography, attributing to the enhanced enantioselective activities of lipase by highly ordered frameworks.

Solid-phase microextraction with MIL-53(Al)-polymer monolithic column coupled to pressurized capillary electrochromatography for determination of chlorogenic acid and ferulic acid in sugarcane samples.

In this paper, a polymer monolithic column based on poly (Butyl methacrylate-co-ethylene glycol dimethacrylate) (poly (BMA-co-EDGMA)) doped with MIL-53(Al) metal-organic framework (MOF) was prepared using an in situ polymerization method. The characteristics of MIL-53(Al)-polymer monolithic column were studied through scanning electron microscopy (SEM), Fourier transform infrared spectrometry (FT-IR), energy-dispersive spectroscopy (EDS), X-ray powder diffractometry (XRD), and nitrogen adsorption experiment. Due to its large surface area, the prepared MIL-53(Al)-polymer monolithic column has good permeability and high extraction efficiency. Using MIL-53(Al)-polymer monolithic column for solid-phase microextraction (SPME), coupled to pressurized capillary electrochromatography (pCEC), a method for the determination of trace chlorogenic acid and ferulic acid in sugarcane was established. Under optimized conditions, chlorogenic acid and ferulic acid have a good linear relationship (r ≥ 0.9965) within the concentration range of 50.0-500 µg/mL, the detection limit is 0.017 µg/mL, and the relative standard deviation (RSD) is less than 3.2%. The spike recoveries of chlorogenic acid and ferulic acid were 96.5% and 96.7%, respectively. The results indicate that the method is sensitive, practical, and convenient. It has been successfully applied to the separation and detection of trace organic phenolic compounds in sugarcane samples.